基于参数预标定的长行程PMLSM无传感器控制

为了解决长行程定子不连续永磁直线同步电机存在的因无法全程安装位置传感器和不同动子和定子之间的电磁参数不固定所造成的控制性能下降的难题,提出一种在每一段定子内先进行参数标定,再进行速度控制的控制系统设计。首先,在动子进入过程中,对电机进行电磁参数标定,根据标定参数对控制器参数进行调整,以达到更好的控制效果。然后,使用无位置传感器控制系统使动子快速达到设定速度值并稳定运行。实验结果表明:动子进入过程参数标定精度分别为0.002Wb和0.000 4H;无位置传感器控制中位置估计精度为0.63mm,速度收敛时间为0.45s,稳态误差为0.02m/s。基本满足永磁直线同步电机用于长行程运输的控制快速性、稳定性等要求。     

Process parameters influence on zone refining and thermodynamics analysis of 1,2-diphenylethane

Effective distribution coefficients of 9 impurities in 1,2-diphenylethane have been calculated by directional crystallization under different ambient frozen temperature. The effect of varied zone size, temperature difference between the melt and ambient frozen environment, number of zone on purity of 1,2-diphenylethane have been also investigated during the process of zone refining. The results indicate that the product purity in the intermediate purified region with varied zone size is higher 0.04%-0.2% than that with constant zone size. The product purity increases with temperature difference between the melt and ambient frozen environment. The appropriate temperature difference is adopted 50℃. The product purity in the intermediate region of sample bar with 2 molten zones is higher 0.05%-0.43% than that with 1 molten zone. In addition, the change of enthalpy and entropy between impurities and 1,2-diphenylethane have been determined.     

Isolation and identification of soil bacteria resistant to surfactants in washing detergents

Linear alkylbenzene sulfonate (LAS) and polyoxyethylene lauryl ether (POLE) are the major surfactants in washing detergents. In the present study, we isolated surfactant-resistant bacteria from soil samples collected from a sports ground and a farm field. The samples were treated with 2.0% LAS or POLE at 25°C for 30 min and cultivated on agar plates at 25°C for several days, after which manifold bacterial colonies were isolated. Thereafter, we tested the ability of each bacterial isolate to resist the antibacterial activity of the surfactant. Ten LAS-resistant strains were isolated, and all were found to be Gram-negative bacteria such as Enterobacter and Pseudomonas. On the other hand, 18 POLE-resistant strains were isolated, of which 14 were Gram-positive bacteria including Bacillus and Microbacterium. Notably, one POLE-resistant strain was identified as Bacillus cereus, a potential causative agent for foodborne illness. The genera of LAS- and POLE-resistant bacteria did not overlap. Therefore, the combination of LAS and POLE could be more effective to eliminate soil bacteria from clothes and/or daily necessities.     

Grain boundary engineered,multilayer graphene incorporated LaCoO3 composites with enhanced thermoelectric properties

Enhancement of thermoelectric properties by virtue of decreased electrical resistance through grain boundary engineering is realised in this study. A robust strategy of optimisation of the transport properties by tuning the energy filtering effects at the interfaces by decreasing the interfacial electrical resistance is achieved in LaCoO₃ (LCO). This is accomplished by the incorporation of multilayer graphene within the parent LCO matrix containing multi-scale nano/micro grains. The present work has attained a substantial increment in electrical conductivity from a value of 96 Scm^-1 for bare LCO to ～5300 Scm^-1 at 750 K by incorporating 0.08 wt% multilayer graphene in LCO. No significant change in thermal conductivity is observed due to the presence of multilayer graphene in LCO. A zT of 0.33 at 550 K for 0.08 wt% multi-layer graphene incorporated LCO composite is achieved which is the highest thermoelectric figure of merit value for undoped LCO reported until now.     

气藏型储气库注气期试井分析探讨

针对气藏型储气库注采井注采过程中储层物性参数影响因素不明确、注采能力不对称的问题。基于相国寺储气库井下连续油管试井测试结果,提出储气库注气期“温降效应”、“变表皮效应”的概念,分析了储气库注采过程中温降效应、变表皮效应以及储层应力敏感对注采的影响。通过气藏型储气库注气期试井分析技术,研究各因素在试井曲线上的响应特征以及对试井解释参数的影响。结果表明:①相对于采气期试井测试,注气期测试得到的储层物性参数具有同样的参考价值;②储气库温降效应对于试井解释结果的影响可忽略不计,而在不同注采运行周期内,变表皮效应以及应力敏感效应影响差异较大;③编制储气库注采运行方案时应充分考虑变表皮效应与应力敏感的影响,在不同注采运行周期内开展试井测试获取准确的储层参数值。研究成果为储气库试井测试与解释提供了重要的研究依据和理论指导。     

马尔可夫跳变线性系统最优控制的研究现状与进展

马尔可夫跳变线性系统（MJLS）是一种具有多个模态的随机系统，系统在各个模态之间的跳变转移由一组马尔可夫链来决定。MJLS模型因其在表示过程中可以产生突变而更能精确的描述实际工程应用中的系统。近年来，MJLS的最优控制问题成为了研究的热点，动态规划、极大值原理以及线性矩阵不等式等成为了解决此类问题的主流方法。本文对MJLS最优控制领域的研究现状进行了综述。分别对一般情况下、带有噪声的情况下、带有时滞的情况下以及某些特定情况下的MLJS最优控制问题的国内外研究现状进行论述。最后进行了总结并提出MJLS最优控制领域未来值得关注的研究方向。     

Ca2+ doping effects on the structural and electrical properties of Na0.5Bi4.5Ti4O15 piezoceramics

Bismuth layer structured Na_0.5Bi_4.5Ti₄O₁₅ (NBT) ferroelectric is one of the most promising materials for potential applications at high temperature. However, it is challenged to achieve a balance between high Curie temperature piezoelectric coefficient and excellent thermal stability for NBT piezoceramics. Here, through chemical modification at the A site of NBT with Ca²⁺, novel (Na_0.5Bi_0.5)_1-xCa_xBi₄Ti₄O₁₅ piezoceramics with excellent properties fabricated by solid state reaction were studied. After doping of Ca²⁺, the Curie temperature T_C increased from 648 °C to 662 °C while the piezoelectric coefficient d₃₃ increased from 14 pC/N to 22 pC/N which can be attributed to the intrinsic contribution of TiO₆ octahedral lattice distortion (tilting and rotation) and the extrinsic contribution of the increased density of domain walls. The composition of (Na_0.5Bi_0.5)_0.95Ca_0.05Bi₄Ti₄O₁₅ ceramics with x = 0.05 has the optimal performance with high T_C of 655 °C, large d₃₃ of 22 pC/N, high electrical resistivity ρ close to 10⁷ Ω cm at 500 °C and especially excellent thermal stability of d₃₃ only about 5% reduction after being annealed at 625 °C. The work effectively reveals the great potential of CNBT-5 ceramics for high-temperature piezoelectric applications.     

环形通道内液态铅铋合金流动换热特性实验研究

通过对环形通道内液态铅铋合金的流动换热特性进行实验研究，得到了气泡泵注气对液态金属流动的影响，并拟合出环形通道内液态铅铋合金的摩擦系数关系式和换热特性关系式。结果表明：采用气泡泵注气能有效提升铅铋合金的质量流速；相同Reynolds数下环形通道内液态铅铋合金的摩擦系数大于由布拉休斯公式计算得到的摩擦系数；液态铅铋合金对流换热过程中，导热项占主导地位，并且Nusselt数随Peclet数的增大而增大。     

Simplification and applicability studies of a hydrogen-air detailed reaction mechanism

The research of hydrogen fuel internal combustion engine (HICE) had great significance facing the challenges of energy and environmental problems. Based on the detailed hydrogen-air reaction mechanism, the pre-mix model of CHEMKIN-Pro software was selected to simplify the detailed mechanism GRI-3.0. The most important elements and reactions was chose to construct framework mechanism firstly based on the sensitivity coefficient for H₂O and NO formation, and additional elements and reactions were added to framework mechanism for complementing the oxidation path of N2 and H₂. A simplified mechanism including 24-step elementary reaction was obtained and the laminar burning velocity calculated by this simplified mechanism matches well with the detailed mechanism in a wide range. This simplified mechanism was also applied in a CFD model which predicted the cylinder instantaneous pressure and NOx emission accurately within a large range of fuel air equivalent ratio. Showing that this mechanism has good applicability.     

An experimental study on the spray characteristics of pressure nozzle in a fluid bed granulation

The particles with a narrow size distribution are proper products in a fluid bed granulation and coating. As well, the process efficiency is one of the most important parameters, and the wall deposition of sprayed liquid reduces it. The modality of spray volume distribution is a key parameter in the definition of particle size distribution and process efficiency. This work is done in two steps: In the first step, an experimental study on spray characteristics including spray flux distribution, spray cone angle, and discharge coefficient is conducted. Based on the experimental data, the curves of liquid volume flux versus nozzle pressure and height are obtained. The results indicate that the flux distribution changes significantly with even small pressure and height changes. In the second step, the granulation process is carried out in a semi-industrial conical fluid bed, and the particles size distribution curves and the deposited mass on the bed wall are obtained. The results show that the precise determination of the spray flux distribution is an appropriate way to predict the well-advised nozzle pressure/height in order to achieve the narrow particle size distribution and high efficiency of the process.